Alto GHIBLI 16 Manuel du propriétaire - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Alto GHIBLI 16. Alto GHIBLI 16 19 pages. 16-channel, multi-effect mixing console with surround output
Également pour Alto GHIBLI 16 : Manuel de l'utilisateur (19 pages)

Imprimer la page

MASTER SECTION

22 INSERT

These large rotary knob controls the level

of the signal sent to MAIN OUTPUTS and

CENTER/SURROUND outputs. All un-muted

channel' s signals will be sent to this control.

23 PHONES control

This control adjusts the signal level sent to

the PHONES output socket. Y ou can use it

to feed a pair of headphones or powered

studio monitors.

24 OUTPUT LEVEL METERs

This consists of two column of 4 LEDs

each ranging from

The 0 (yellow) LED corresponds to a level

output of 0 dBu. The 10 ( red ) LEDs

come to life when the output reaches

+10dBu. Set the MAIN MIX level control

so that the 10 LEDs only flash occasionally.

In general, you get a good mix level when

the Meter LEDs operate in the range -10

to 0. If you exceed 0, you will get distortion.

If even 20 LEDs are sleeping, your

signal-to-noise ratio will suffer .

25 OPERATING LED

This LED indicates when your GHIBLI 16(FX) is switched-on.

26 BASS-ENHANCER

The Main Output Stage of your GHIBLI 16(FX) features a very useful BASS

ENHANCER processor that also provides to recover the very low end of the

audio band, if you are using a small PA system without big woofer .

4. CONTROL ELEMENTS

20 dB to +10 dB.

OPERATING

BASS ENHANCER

0dB

BYPASS

+10

PHONES

LEFT

-20

-10

RIGHT

MAIN MIX LEVEL