Alto HPA4 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Alto HPA4. Alto HPA4 14 pages. 4-channel headphone amplifier

Imprimer la page

4. INSTALLATION & ONNECTION

4.1 Mains Connection

This is a dual voltage unit. Please ensure that the

correct supply voltage before plugging the power cord into the wall outlet, use the same fuse as marked on the

fuse holder at the AC power connection socket.

Do not insert power cable into the unit until voltage has been correctly set. Do not plug the power cable into AC

power until voltage has been correctly set.

The mains connection of the

cable and a standard IEC receptacle. It meets all of the international safety certification requirements.

4.2 Audio connection

The HPA4

4-Channel Headphone Amplifier

it can be interfaced by several ways to support a variety of applications without any signal loss.

a. Wiring Configuration

Either the 1/4" TRS (Tip-Ring-Sleeve) phone jack or the XLR servo connector can be wired in balanced and

unbalanced modes, which will be determined by the actual application status, Please wire your systems as the

following examples:

For 1/4" Phone jack

TS Type Unbalanced

For XLR connector

XLR Type Unbalanced

b. In Line Connection

For these applications, the HPA4 4-Channel Headphone Amplifier provides XLR connectors and 1/4" TRS

phone jack to easily interface with most professional audio devices. Follow the configuration examples below

for your particular connection.

LTO HPA4 4-Channel Headphone Amplifier is made by using the enclosed mains

Tip

Sleeve

Pin2 (+)

Pin3 (-)

(Linked to Pin1 manually,

Pin1 ( )

LTO HPA4 4-Channel Headphone Amplifier is set to the

presents with balanced XLR connectors and 1/4" TRS phone jack and

Tip

Ring

Sleeve

TRS Type Balanced

Pin3 (-)

)

Tip

Ring

Sleeve

TRS Type Unbalanced

Pin2 (+)

Pin1 ( )

XLR Type alanced