Acoustic Research AW772 Instructions d'installation et d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et d'utilisation pour {nom_de_la_catégorie} Acoustic Research AW772. Acoustic Research AW772 12 pages. 900 mhz wireless headphones 150 ft (45 m)

Imprimer la page

OPERATION (continued)

6. After selecting a channel, use the fine tuning control, located on right

earphone to adjust the reception. The PLL function automatically

locks the three channels, providing you with top-quality audio

reception with no sound loss.

7. Adjust the volume using the volume control, also located on the

right earphone.

8. When you are through using the headphones, switch them off

using the POWER ON/OFF button, and place the audio source

on standby.

Note: To ensure that your headphones are charged and ready for

use at all times, place them in the recharging cradle/transmitter when

not in use.

alternate Installation Configuration

The accessories included with your headphone system include a jack

adapter for connecting the unit to a 6.35 mm headphone socket and

a Y cable. Normally, when a device is plugged into a headphone jack,

it automatically shuts off the speakers. If you want the speakers to

continue playing while you are using the headphone set, you can use

the Y adapter instead of the headphone jack. Use the supplied Y cable

to connect your headphones to the two (red and white) RCA jacks.

Connect the other end of the stereo audio cable to the AUDIO IN input

jack at the back of the recharging cradle/transmitter. This is especially

useful if, for example, your family is listening to music in one room

of your home and you want to listen to the same music in another

room. It is also beneficial in families where one person has a hearing

impairment. That person can use the headphones to listen to the

audio source, adjusting the volume as needed. This type of connection

also enables you to use your headphones more simply as you will

only need to switch on the audio source and switch on your

headphones to activate.