CAMELBACK Displays Sacagawea designs VK-1224 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} CAMELBACK Displays Sacagawea designs VK-1224. CAMELBACK Displays Sacagawea designs VK-1224 5 pages.

Imprimer la page
CAMELBACK Displays Sacagawea designs VK-1224 Manuel
Sacagawea
Counter, Wing and Sign Attachment
Steps:
1) Attach lights as indicated.
2) Attach assembled header frame and apply graphics as shown.
3) Attach assembled counter supports [10/11] to vertical where indicated.
4) Attach support legs [10a] to counter support [10/11].
5) Attach flange plates [11a] to top of curved extrusions [10] as shown.
6) Attach counter tops to supports, see
7) Attach wings to A10 clamps as shown.
8) Attach round sign to backwall frame as indicated.
Attach monitor mount back
*
plate to connectors using
setscrews provided.

Wing Attachment

Slide A10 Clamp
into groove
of square extrusion.
A10
When desired location
is found, tighten
set screw to secure.
Set-
Screw
Tighten black plastic
set screw to secure
Wing in place.
Black Plastic
Knob
Keep A10 clamps
attached to verticals
www.camelbackdisplays.com
Item
Qty.
7/8/9
1/1/1
10
10a
11
11a
counter top attachment
detail.
7
*
Connector
Counter Top Attachment
Monitor
*
Insert screws located on underside
of counter into holes on flange plate
Mount
and secure with wing nuts.
Screw
Wing Nut
11a
11
Note:
Curved extrusion
10
[10] and horizontal [11]
stay assembled for
shipping and packing.
10a
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Description
Header Frame
2
30.2" Curved Extrusion
2
Leg Support
2
12.184"w Horizontal Extrusion
2
Flange Plate
Note: Header frame ships
9
and packs assembled
Attach graphic
8
to hook & loop on
back of header
frame
10
10a
*
Graphic Attachment
Screw
11a
11
and twist to secure in place. Secure graphic
Step 2
Graphic
Standoff
Barrel
Screw
Cap
Slide connector on back of standoff
barrel into groove of extrusion
to standoffs using screw cap.
Light Connection
*
Attach lights to
backwall where
desired and
tighten in place.
© 2012
Page 2 of 2