Alto M3 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Alto M3. Alto M3 11 pages. Passive & active models
Également pour Alto M3 : Manuel du propriétaire (16 pages)

Alto M3 Manuel de l'utilisateur
-. For M Series Active Monitor Speakers

(1) Power Indicator

This LED lights up blue when the M series active speakers are powered on.

(2) Power Switch

This switch is used to turn the M series active speakers on or off.
Caution: Make sure your supply voltage is identical to the value marking on your products before turning on the
power switch.
(3) AC Socket with Main Fuse
This socket is used to connect your M series active monitor speakers with the mains.
Caution: B
efore turn on the power, p
Replace the fuse with the same type by the qualified personnel
(4) NEAR or FAR Field Selection
Via this switch, you can apply your M series monitor speakers in the near field or far field configuration.
Generally, near field option is designed for the near distance monitor which is mainly used in the smaller sound system,
and the speakers are placed relatively close to the listener, normally about 1~1.5m.
By the near field monitoring, you can try to avoid the interference caused by the acoustic environment, esp. the reverb
effect, and do the serious mixing.
As for far field option, it is usually designed for the larger sound systems, where the monitor speakers are placed com-
parative farther away from the listener.
(1)
(2)
(4)
lease make sure the voltage is identical to the values marking on the products.
3
LTO
M5A
M
SERIES MONITOR
HIGH FREQUENCY AMP-60 WATT (FULL RANGE)
LOW FREQUENCY AMP-130 WATT (FULL RANGE)
MODEL
SERIAL
ON
SENSITIVITY
-30
NEAR
POWER
dB
SW
+6
OFF
FAR
Use only with a 250V fuse
110-120VAC~4A 60Hz
(3)
only
.
R
(5)
OUT/LINK
BALANCED
(7)
SIG.INPUT
BAL/UNBAL
(6)