Alto PAM5 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Alto PAM5. Alto PAM5 10 pages. Pam series active/passive live monitor
Imprimer la page
- 1. Safety Instructions
- 1. 1 PAM5 Passive Live Monitor
- 1. Quick Start - Passive Speaker Cabinet
- 1. Input / Link Connections
- 1. Wire Connections
- 2. Table of Contents
- 2. 2 PAM5A Active Live Monitor
- 2. Quick Start - Active Speaker Cabinet
- 2. Control Elements for PAM5A Rear Panel
- 3. 3 PAM5T Installation Speaker Cabinet
- 3. Quick Start Passive - Line 70.7/100V Connection
- 3. Control Elements for PAM5T Rear Panel
- 4. 4 Technical Specifications
1. PAM5 Passive Live Monitor
1.1 Quick Start - Passive Speaker Cabinet
Make all initial connections, with the power switches Off for all equipment and main volumes are closed.
Connect one side of the speaker cable to the
amplifier and the other side to the
Caution: The Nominal Impedance is 16 ohm and the Minimum Impedance is 12 ohm.
Put more attention to the impedance value, when you connect more speakers with the same power amplifier.
1.2 Input / Link Connections
Two types of linked connector are used,
lation.
The Positive connection is usually marked with ( + ), or Red for push-button.
In case of 1/4" Standard Jack, the Tip of the plug is positive connection.
The Negative connection is usually marked with ( - ), or Black for push-button.
The sleeve of 1/4" Standard Jack will be the negative connection.
Output CHA-CHB
Input Link
(Jack for Live applications) or
R
LTO
PAM5
SOUND REINFORCEMENT
SPEAKER SYSTEM
POWER HANDLING
AES 100 Watts
PEAK 200 Watts
IMPEDANCE
16 ohms nominal
MODEL
SERIAL
DESIGNED AND DEVELOPMENT IN ITALY
LINK
INPUT
-
+
INPUT
Mono Jack (1)
3
(SPK+1/-1) or Binding Post of your stereo power
Push-Button
(1)
(2)
for Live application and
Push-Button (2)
(for fixed installations).
for fixed instal-