Alto AltoDrive2.3 Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Alto AltoDrive2.3. Alto AltoDrive2.3 19 pages. Crossover digitale 2 way stereo digital x over
Également pour Alto AltoDrive2.3 : Manuel de l'utilisateur (20 pages)
Imprimer la page
Using Left and Right keys the user can move into the string, with the dial the blinking character can be edited,
Enter confirms the choice and Esc cancels operation allowing to maintain the old preset name. Upon confirmation
the new preset name will be shown in the lower left corner of the window and in the name field.
To get back to the main menu, select 1/1 and press the Esc key.
c. MIDI Setup
This function allows a simple MIDI configuration:
with the Up/Down key it's possible to select the MIDI channel and/or the output enable; selection is
highlighted printing the item in reverse color.
With the dial it is possible to change the value of the parameter, which will be operating immediately
(no confirmation needed). To get back to the main menu, select 1/1 and press the Esc key. These two
parameters are system settings, ie. They don't belong to a particular preset.
d. VU-Meter
This page shows 4 output volumes and activity of the 4 output limiters. (see)
e. Password
With this function the user can decide if the device has to be protected from unauthorized tampering:
Name:
Num:
PRESET 01
PRESET 01
MIDI
CHANNEL
01
OUT EN.
OFF
1 / 1
PRESET 01
1 2 3 4
OUT VOL
PRESET 01
STORE
EMPTY
02
1 / 1
MIDI
CHANNEL
01
OUT EN.
OFF
1 / 1
CHANNEL
OUT EN.
PRESET 01
1 2 3 4
LIMITER
1 / 1
7
MIDI
01
OFF
1 / 1