Alto L-6 Manuel du propriétaire - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Alto L-6. Alto L-6 19 pages. 6-channel mixing console with digital effects

Imprimer la page

17 LOW

If you turn this control up, you will boost all frequencies below 80 Hz. You will

give more punch to bass drums and bass guitar; and you will make the male

vocalist more "macho". Turn it down and you will cut all the frequencies below

80 Hz. In this way you can avoid low-frequency vibrations and resonance thus

preserving the life of your woofers.

MASTER SECTION

18 MAIN MIX LEVEL

This knob controls the level of the signal sent to MAIN OUTPUTS and TAPE OUT.

Also AUX RETURNS signals will be sent to this control.

19 PHONES/CONTROL ROOM LEVEL

This knob controls the signal sent to CONTROL ROOM OUTPUT & PHONES

OUTPUT.

20 OUTPUT LEVEL METERS

These consist of two column of 6 LEDs each ranging from -30 dB to +18 dB

(CLIP). The 0 LED corresponds to a level output of 0 dBu. The CLIP LEDs come

to life when the output reaches +18 dBu. Set the MAIN MIX level control so

that the CLIP LEDs only flashes occasionally. In general, you get a good mix

level when the Meter LEDs operate in the range 0 to +10. If you exceed +10,

you will get distortion. If even -30 LEDs are sleeping your signal-to-noise ratio

will suffer.

4. CONTROL ELEMENTS

+15

AUX RETURNS

(DFX)

2TK TO

CTRL ROOM

MAX

CONTROL

PHONES /

ROOM

25 26

PHANTOM

POWER

CLIP

PHANTOM PWR

-4

-10

-30

2TK TO MIX

OUTPUT LEVEL

+15

MAIN MIX LEVEL