Alto MAXI-Q PC Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Alto MAXI-Q PC. Alto MAXI-Q PC 15 pages. 30+30 band digital equalizer

Imprimer la page

1. INTRODUCTION

Your MAXI-Q PC is a 30+30 Band Digital Equalizer and it also is a powerful versatile signal processor. you can set

the input and output configuration only through recalling one of the presets included in the internal memory or PC

Editor software. Thanks to the use of selected and expensive components, the MAXI-Q PC is worth much more than

its price.

2. FEATURES

Single rack unit

2 COMBO input connectors are compatible with balanced XLR and JACK

2 outputs with balanced XLR connector

A/D and D/A converters for a 117dB dynamic range

Delay lines up to 2715ms for each channel

10 Factory presets and 128 user presets by large memory capacity

Switching power supply

Remote control

Manufactured under QS9000, VDA6.1 certified management system

3. CONTROL ELEMENTS

3.1 The Front Panel

LTO

RS232

1. Power Switch

The switch is used to turn the main POWER on and off.

Note: Before turning on the unit, please make sure the amplifiers of sound system are off to avoid the annoying

and sometimes dangerous signal peaks.

2. LED Display

The both LED indicate the selecting status; one is for PRESET, another for ID.

3. UP/DOWN Keys

There are 10 factory presets, 128 user presets and 32 ID selections. The both keys are used to allow you to

turn over the variable presets or ID selections for achieving the proper one.

4. SEL Key

Activate the SEL key to select required PRESET LOAD or SET COMM. ID functions.

5. ENTER Key

The key allows you to access to the selected preset or ID selection.

6. RS232 Serial Communication Port

The RS232 port allows incoming and outgoing communication between the MAXI-Q PC and a PC. Via conne-

cting the MAXI-Q PC to a PC, all the functions are possible to be control remotely by ALTO editing software.

1>.Ensure that power to the MAXI-Q PC and the computer is switched off.

2>.Connect the MAXI-Q PC to the PC's RS232 serial port using a data cable with 9-pin female plugs. The re-

quired data cable is known as a 'null modern' (also data transfer) type serial interface cable. Attach the other

end to the 9-pin socket situated next to the audio output terminals of the MAXI-Q PC.

3>.Turn on your audio system, including the MAXI-Q PC. Now boot up your computer and run the PC editor

(see "Configuration of the system").

PRESET

SEL

DOWN

ENTER

30 30 BAND

DIGITAL EQUALIZER

OFF

POWER