Balt 91113 Instructions de montage - Page 3
Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} Balt 91113. Balt 91113 5 pages. Up-rite desk mounted sit/stand workstation single monitor
Imprimer la page
R
T
I
EAD
HROUGH
NSTRUCTIONS FROM BEGINNING
BEFORE
TO END
STARTING TO ASSEMBLE UNIT
Identify and Seperate all the parts to your new Workstation.
1.)
Slide the Mount Bar (P5) under the clamp section of the Support Post (P2). Loosely attach
2.)
using two Screws (F) and two Screws (E) as shown in illustration #1.
F
Loosen the two Allen Recess Screws in the rear section of the Support Post's (P2) table
3.)
clamp. Next, loosen the two Allen Recess Screws in the top section . Slide the Support
Post (P2) onto the back of the table you will be using. Tighten the two top Screws (E)
using Allen Wrench (C) untill the Support Post is firmly in place. Tighten the two Screws (F)
in the rear of the clamp to lock the unit in place. See illustration #2.
Rear
Screws
Assembly Instructions
E
P2
Top
Screws
.
P2
P5
3
Illustration # 1
.
Illustration # 2
Your
Table
. .