Camfil CITY S Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Camfil CITY S. Camfil CITY S 9 pages.

15 AIR FLOW DETAILS

Dirty air

Clean air

16 TAKING INTO OPERATION

First, read the entire Technical Manual.

Only appropriately qualified electricians may carry out work with electrical connections. You

must be able to turn off the power supply without touching the unit.

Connect the air purifier to the electrical outlet. Ensure that there is nothing obstructing the air

outlets / inlets (see figure below how to operate).

Camfil – Clean Air Solutions

Filters

Fan

Controller card description

•

Press + (plus) to increase the airflow (the blue led indicators will guide you to what

airflow you have chosen)

Press – (minus) to lower the airflow

•

A red warning light will be lit at the filter change symbol, when it's time for filter

•

replacement.

•

When the red warning light have been lit and filter are replaced you need to calibrate

the unit by pressing + and- at the same time during 5 seconds. Now you are secured that

the warning light will be lit again when it's time for filter replacement.

•

On the back side of the unit is the electrical connector with fuse holder and machine plate.

17 POSITIONING

The unit must always be positioned and used indoors only. Air outlets and intakes must not be

obstructed during use. Before putting the air purifier in operation, ensure there is sufficient space

(10 cm) around the outlet and inlet.

18 ELECTRICAL CONNECTION

Electrical connection must be carried out by an appropriately qualified electrician. All routing of

cables, etc., must be carried out in accordance with the relevant regulations. The unit comes from

the factory ready for plugging in. Any alterations to the machine's internal electrical systems must

only be carried out by appropriately qualified persons using equipment supplied by Camfil.

The unit must only be connected to the network voltage stated on the machine plate (identification

plate).

Camfil – Clean Air Solutions