Camille Bauer SINEAX CAM Manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Camille Bauer SINEAX CAM. Camille Bauer SINEAX CAM 19 pages. Graphic display for sineax cam
Également pour Camille Bauer SINEAX CAM : Manuel d'utilisation (12 pages)
Imprimer la page
2. Settings
2.1 Settings of the display
2.2 Settings of the interface
5
select a parameter group
Invoke the line settings in the main menu. This
line will be visible only if the selection is shifted
downwards. In the menu settings go to the line
with the desired parameter group using the
keys
and
. Then invoke the corresponding
parameter page by pressing the key
parameter selection
Position to the parameter which should be
modified using the keys
see the value start flashing. Subsequent the
possible functions of the operating menu
change.
modifying parameters
The parameter can now be adjusted to the
desired value using the keys
pressing the key
adopted and stops flashing. The operating
menu changes back. Repeat the procedure for
other parameters.
display 2
Preference display and rotation are features of
the customer specific measurement displays
(see page 8). Auto scaling adjusts the repre-
sentation to the measurement value. This way
and if input signals are low more digits are
shown, but maybe are not significant.
adjust Modbus parameters
Following the procedure used in 2.1 modify the
parameters device address and the baud rate
to your needs.
Attention: All devices connected to the Modbus
must have the same baud rate.
.
and
. Press
and
. After
again the value will be
to