3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit Manuel d'instruction - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit. 3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit 20 pages.

Imprimer la page

5. Attach Top

Use access through the doors to attach

the top of the enclosure using M4 10mm

screws.

6. Attach Right Side

The right side has a front vent port for

air ﬂow, and a rear square vent to

access the power supply and oﬀ/on

switch.

If you have a CRX, then the right side

will be exactly like the Left Side, with

the addition of an access port for the

power cable and switch. If you have a

CR-10S Pro, then the right side won't

have a door.

The right side is tricky to attach because of the large size of the enclosure. Although

attaching it consists of simply screwing it to existing connectors, unless you have

exceedingly long arms you will need a buddy to help hold the nuts in place. Customers

have done everything from having a child climb into the enclosure to placing the entire

enclosure on the side of a table to access the nuts.

Note that the vents slide in from the outside.