esera automation 11319 Mode d'emploi - Page 4
Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} esera automation 11319. esera automation 11319 4 pages. 1-wire controller 1 ethernet w/auto-e-connect
Également pour esera automation 11319 : Manuel de l'utilisateur (9 pages)
Imprimer la page
If the available description is not clear to the non-commercial end-user what the applicable electrical characteristics
for a part or assembly are, how to connect an external circuit, which external components or additional devices can
be connected or which values these external components may have, a qualified electrician must be consulted.
It must be examined generally before the commissioning of a device, whether this device or module is basically
suitable for the application in which it is to be used.
In case of doubt, consultation with experts or the manufacturer of the components used is absolutely necessary.
For operational and connection errors outside of our control, we assume no liability of any kind for any resulting
damage.
Kits should be returned without their housing when not functional with an exact error description and the
accompanying instructions. Without an error description it is not possible to repair. For time-consuming assembly or
disassembly of cases charges will be invoiced.
During installation and handling of components which later have mains potential on their parts, the relevant VDE
regulations must be observed.
Devices that are to be operated at a voltage greater than 35 VDC / 12mA, may only be connected by a qualified
electrician and put into operation.
Commissioning may only be realized if the circuit is built into a contact proof housing.
If measurements with an open housing are unavoidable, for safety reasons an isolating transformer must be installed
upstream or a suitable power supply can be used.
After installing the required tests according to DGUV Vorschrift 3 must be performed.
13
Warranty
ESERA guarantees that the goods sold at the time of transfer of risk to be free from material and workmanship defects and
have the contractually assured characteristics. The statutory warranty period of two years begins from date of invoice. The
warranty does not extend to the normal operational wear and normal wear and tear. Customer claims for damages, for
example, for non-performance, fault in contracting, breach of contractual obligations, consequential damages, damages for
tort and other legal grounds are excluded. Excepting to this, ESERA accepts liability for the absence of a guaranteed quality
resulting from intent or gross negligence. Claims made under the Product Liability Act are not affected. If defects occur for
which the ESERA is responsible, and in the case of replacement goods, the replacement is faulty, the buyer has the right to
have the original purchase price refunded or a reduction of the purchase price. ESERA accepts liability neither for the constant
and uninterrupted availability of the ESERA for technical or electronic errors in the online offer.
We develop our products further and we reserve the right to make changes and improvements to any of the products
described in this documentation without prior notice. If you need documentation or information about older product versions,
contact us by email at
14
Trademarks
All mentioned designations, logos, names and trademarks (including those which are not explicitly marked) are trademarks,
registered trademarks or other copyright or trademarks or titles or legally protected designations of their respective owners
and are hereby recognized as such by us. The mention of these designations, logos, names and trademarks is made for
identification purposes only and does not represent a claim any kind on the part of ESERA, E-Service GmbH on these
designations, logos, names and trademarks. Moreover, from their appearance on these WWW pages it cannot be concluded
that designations, logos, names and trademarks are free of commercial property rights.
1-Wire is a product name of the company. Maxim Integrated Products, Inc., USA. further
information
http://www.maxim-ic.com
15
Contakt
ESERA-Automation
E-Service GmbH
Adelindastrasse 20
87600 Kaufbeuren
Tel.: +49 8341 999 80-0
+49 8341 999 80-10
Fax:
http://www.esera-automation.de/
WEEE-Nummer: DE30249510
All rights reserved. Reprinting,, also in excerpts, without prior permission of ESERA and E-Service GmbH prohibited. Technical changes
reserved. ESERA E-Service GmbH 2016
www.esera-automation.de
11319 Manual 1-Wire Controller 1 ETH V2.2
Page 4 von 4