esera automation 11325 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} esera automation 11325. esera automation 11325 8 pages. 1-wire controller 1 bluetooth
Art. No. 11325
Setup on Linux
Here is a short guide for Linux:
Bind device using the normal Bluetooth functions
Run hcitool scan and remember the MAC
Create /etc/bluetooth/rfcomm.conf file if necessary
recomm.conf add the following entry:
# RFCOMM configuration file.
rfcomm0 {
# Automatically bind the device at startup
bind yes;
# Bluetooth address of the device
device 00:12:6F:2B:B1:52;
# RFCOMM channel for the connection
channel 1;
# Description of the connection
comment "1-Wire_Controller1";
}
Device must of course be adapted.
rfcomm connect 00:12:6F:2B:B1:52 execute in the console.
Now the serial interface can be accessed with a normal terminal program. (/dev/rfcomm0 )
8
Display LED
The module has various display LEDs. In the following the function of the displays
Display
LED Green
LED Green
LED Green
Data interface
LED Green
Data interface
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
Bezeichnung
Funktion
PWR
Display for supply voltage
DATA
Network Link LED,
Lights up when a network connection is established
Network Data LED
Lights up during data communication via the data interface
11325 V2.0 R1.0 Manual
#Here you enter the MAC address of the 1-Wire Controller 1
After switching on the device the LED flashes 3x
flashes during 1-Wire activity
flashes when data is sent via the data interface
flashes very quickly if "CAL Receive" has been
activated and the "CAL messages" of the control
system are missing.
Page 3 of 8