Acoustic Signature TA-700 Manuel d'instruction - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Acoustic Signature TA-700. Acoustic Signature TA-700 8 pages. Pick-up arm
Imprimer la page
OK
Not OK
6.2 Adjusting the cartridge
Make sure to use it in the exact orientation as shown in the pic.
This ensures your template is in the correct angle for adjusting the
cartridge.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3 Adjusting the cartridge
Lift down the cartridge and place the diamond tip of the cartridge
on the reference point of the alignment gauge and make sure that
the edges of the cartridge are absolutely parallel to the marking
lines printed on the cartridge alignment gauge. For that adjust-
ment it is necessary to take a look directly from the top on the to-
nearm and the alignment gauge. We suggest to align only to the
inner point of the alignment gauge!
6.4 Adjusting the cartridge
If you have to change the position of the diamond tip you can uns-
crew the screw on the top of the tonearm`s headshell and move
the cartridge into the corresponding position.
Please make also sure that the leading edge of the cartridge is
parallel to the marker lines of the cartridge alignment gauge and
the needle is exactly in the reference point. If not correct it by
moving forward and backward and changing the angle.
Fix the right position through looking the headshell screw on the
top.
7. Longitudinal balance
Position the arm so that it is clear of the armrest and the cartridge
is clear of the turntable. Move the lift into the low position. Balance
the arm by rotating the weight to move it backwards or forward as
required to make the arm float around his zero point.
The tracking force weight has 3 screws around his circle to fix the
position. Make sure to tighten the screws only vers very soft.