esera automation 19200-1 Manuel

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} esera automation 19200-1. esera automation 19200-1 9 pages.
Également pour esera automation 19200-1 : Manuel de l'utilisateur (5 pages)

Imprimer la page

Art. Nr. 19200 Linux

 Open system hardware and software central

control for smart home,

building automation, IoT and commercial

automation

 Hybrid structure consisting of embedded

computer

and 1-Wire gateway

 Powerful, modern quad core computer with

1.2GHz CPU speed

 Fast readout of all 1-Wire devices in

1-2 seconds cycle

 Data exchange between 1-Wire Gateway

and Computer via Modbus or text protocol

 Extensive 1-Wire libraries for sensors and

actuators

 2 x binary output 16A

 2 x binary input 10-30VDC

 2 x system clocks with power failure buffer

 Comfortable configuration program for 1-Wire

Gateway

and interface parameters

 24V power supply for embedded computer

and 1-Wire Gateway

 Designed for all 1-Wire network sizes

 Top-hat rail housing for control cabinet

installation

Introduction

Before you start to install the ESERA-Station 200 and put the device into operation, please read through this

operating manual until the end, especially the section on safety instructions

Produkt description

The ESERA-Station is a modern and open-system hybrid system consisting of two modules, a powerful

1-Wire Gateway and an embedded computer.

Both modules are connected internally via serial data interface and the power supply.

Each module has its own power supply unit and a system clock (real time clock) with power failure buffering by a

low-maintenance high-performance capacitor (gold cap).

IP-Adressen

On delivery, the ESERA-Station is set to DHCP for LAN and WLAN Interface.

ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020

www.esera.de

ESERA-Station 200

Commissioning II

Linux Manual

19200 V1.0 R1.0 Commissioning II

Page 1 of 9