Divis CH03202 Instructions d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Divis CH03202. Divis CH03202 2 pages. Day & night vandal dome camera, ip 65, 4-axis
Imprimer la pageOSD Menu Structure 1
Setup Menu
Mode
Lens
DC / Manual DC: Auto iris lens, Manual: Fixed iris lens
AUTO: Brightness adjustable
FIXED: 1/60,1/100,1/250,
Auto / Fixed /
Shutter
Manual / FLK
MANUAL: 1/60 ~ 1/100,000sec(256steps)
FLK: Flickerless
ON Mode - BLC AREA : 64 areas selectable
BLC
Off / On
AGC
On / Off
256 steps adjustable
ATW : One Push
ATW / AWB /
White Bal.
AWB : 2,500K ~ 9,500K
FIXED /
MANUAL
FIXED : 2,500K ~ 6,500K ( Mode 1 ~ 4)
Refer to the
Function
(Structure 2)
next Table
CONTRAST : 256 steps adjustable
Contrast /
Adjust
SHARPNESS : 32 steps adjustable
Sharpness /
CB_Gain /
CB_GAIN : 256 steps adjustable
CR_Gain
CR_GAIN : 256 steps adjustable
Exit
-
Saves all the SETUP Menu and then exits
OSD Menu Structure 2
Mode
Setup Menu
English capital letter,
Numeral 0~9, 28
Camera ID
special letters with
blank
Mirror
Off / On
Day & Night
Auto / Color / B/W
Motion
Off / On
0.05 ~ 1.00
Gamma
Adjustable
Privacy
Off / On
English/Korean/
Language
Japanese/Chinese
Reset
-
Return
-
Summary
(Only for manual mode)
1/500,1/2,000, 1/5,000,1/10,000,
1/100,000sec selectable
- BLC RATIO : 64 steps adjustable
Summary
Maximum length for display is limited to 15
letters
Position is selectable
Set a horizontal image inversion
ON AUTO Mode
- DELAY,START LEVEL,END LEVEL :
adjustable
- MANUFACTUR VALUE : START 1.5Lux,
END 7Lux
COLOR: COLOR fixed
B/W : B/W fixed - BURST signal is
removable on B/W mode
ON Mode
- 64 area selectable
- Push the set button for seconds after
areas select
- THRESHOLD : Audjust Motion detect
sibility (256steps)
- MOTION TRACE : ON/OFF
Default value is 0.45
ON Mode: 4 Programable zones
(Size,Position,Contrast)
Set the language on setup menu
Return to the factory mode
Save the function menu and return to the
SETUP menu
Specification
Model
Type
Day & Night Vandal Dome Camera
Image Sensor
1/3" CCD [Sony SUPER HAD II CCD]
Effective Pixel
768(H) x 494(V) PIXEL
Cell Size
6.35μm(H) x 7.4μm(V)
Resolution
HORI. Color 530TV LINE
B/W 550TV LINE
TV Type
NTSC
Sync. Type
INTERNAL
Scanning System
2:1 Interlace
Scanning Frequency H.
15.734 KHz
Scanning Frequency V.
59.94 Hz
Video Out
1.0 Vp-p (Sync. Negative) Termination 75
Gamma Characteristic
= 0.45typ.
Min. Illumination
0.1 Lux at Color (F1.2)
S/N Ratio
45dB or More (AGC OFF)
Gain Control
Auto
Shutter
1/60 ~ 1/100,000 sec
Test Illumination Area
AVERAGE TEST ILLUMINANCE BY FRONT VIEW
Current Consumption
140mA Max
Supplied
Voltage
Regulated DC12V
Reverse Polarity Protection
YES
Lens
2.8~11mm
Operation Temp / Humidity
-10 ~ 50 °C
Preservation Temp / Humidity
-20 ~ 60 °C
Dimension
153mm(W) X 105.2mm(H)
Weight
Approx. 1.2kg
Troubleshooting
If you have a trouble operating your camera, refer to the following.
If the guidelines do not enable you to solve the problem, contact an
authorized technician.
The image does not
Check the power source for the monitor and camera
appear on the screen.
and assure that the voltage and polarity are properly
connected and being supplied correctly.
The image on the
Check if the lens is stained. If dirty, clean the lens
screen is dim.
with a soft, clean cloth.
Adjust the Back Focus of the lens again.
Check if you have connected the camera to a proper
The surface of the
power source and if there is no problem with the power,
camera case is hot and
turn the unit off immediately and seek assistance from
a black line appears on
our After Service department.
the screen.
Check if the camera is pointed toward the sun or a
The screen blinks a lot.
fluorescent lamp.
Adjust the angle or location of the camera if too much
light is coming into the screen.
CH 03202
±
15%