where
TFTPServerIPAddress
The Primary RMM firmware will be updated along with firmware for the other modules in this chassis.
When the firmware update is completed, the RMM restarts automatically.
5. After the RMM restarts, log into the RMM again and enter the following command:
sfw 0
The other RMMs and modules in this Chassis Group are updated.
To install this firmware using Sentral, the following pre-existing conditions must be met:
•
The R4300 Chassis Group to be updated must be already discovered within Sentral.
•
A TFTP Server must be configured in Sentral's Console Configuration screen, and running.
•
The firmware update must be in a directory that is visible to the Sentral Console.
Note: If the Sentral server is also the TFTP server, do not copy the firmware update file to the root direc-
tory, or to the directory where the TFTP server is configured to get the file. This will cause the update to
silently fail. For example: If the user has the rmm53B12 file in the directory c:\Firmware, do not configure
the TFTP server to "get" the files from this same location.
To update RMM firmware using Sentral, do the following:
1. From the Functional menu, select Management > Chassis.
2. In the Tasks menu, click Update Firmware.
3. Select the primary RMM from the Primary Execution Pane.
4. In the Tasks menu, click on Select for Update.
5. In the Serial Number column, select the serial number of the chassis containing the RMM to be
updated.
6. Click on Browse and choose the rmm53B12 file.
7. Press Update Now. The Primary RMM and the other modules in this chassis are updated.
After the Primary RMM has been updated, do the following to update the other RMMs in the Chassis
Group:
1. From the Functional menu, select Management > Chassis.
2. In the Tasks menu, click Update Firmware.
3. In the Tasks menu, click on Update Group.
4. Select the Chassis Group that contains the RMM you just updated, and click Select for Update.
5. Select Browse and browse for the update file.
6. Press Update Now. The other RMMs and modules in this Chassis Group are updated.
7. After updating each Chassis Group, re-discover the Chassis Group.
For more information, see the Sentral Administrator's Guide.
UPDATING THE BOOTLOADER AND RAM DRIVER FIRMWARE
If your RMM firmware is version 4, you need to update the RAM Driver and the Bootloader firmware (in that
order) before you can update the RMM firmware.
To update the RAM Driver and the bootloader firmware, do the following:
ClearCube Technology
8834 Capital of Texas Hwy N
is the IP address for the TFTP server.
Austin, Texas 78759
ClearCube Public Technical Document
Document Code: TB0220JW
voice 512 652 3500 www.clearcube.com
TB0220 Rev C
Imprimer la page