Divitec HDB-M120 Manuel d'installation rapide - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Divitec HDB-M120. Divitec HDB-M120 15 pages. Full hd network camera

Imprimer la page

[Alarm connector]

Alarm Input 1

Alarm Ground

Alarm Input 2

Alarm Output

Alarm Ground

RS485 -

RS485 +

Network Connection

The Network Camera supports the operation through the network. Therefore, it is necessary to

connect a standard RJ-45 cable to it. Generally a cross-over cable is used for directly connection to

PC, while a direct cable is used for connection to a hub.

IP Assignment

When a camera is first connected to the network it has no IP address. So, it is necessary to allocate

an IP address to the device with the "Smart Manager" utility on the CD.

1. Connect the Network Camera / device to the network and power up.

2. Start Smart Manager utility, the main window will be displayed, after a short while any network

devices connected to the network will be displayed in the list.