Eseye HERA600 Series Manuel de configuration - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Eseye HERA600 Series. Eseye HERA600 Series 11 pages.
Imprimer la page4.1 IAD 1 - 192.168.1.2
feature serial2ip add port 2
If port already exists then you can change its configuration.
feature serial2ip set port 2 server 192.168.1.10:49200
feature serial2ip set port 2 protocol tcp
feature serial2ip set port 2 listenport 49200
feature serial2ip set port 2 enabled true
4.2 IAD 2 - 192.168.1.10
feature serial2 to ip add port 2
feature serial2ip set port 2 server 192.168.1.2:49200
feature serial2ip set port 2 protocol tcp
feature serial2ip set port 2 listenport 49200
feature serial2ip set port 2 enabled true
Note: Whenever the configuration is changed, you need to execute the "feature
serial2ip set port _portno_ enabled false" then "feature serial2ip set port _portno_
enabled true" to allow the changes to take effect.
The tcpclient will try to connect to the server whenever the data is received from the
uart until the connection is established.
6