Alto-Shaam Hot Carving Shelf 100-HSL/BCS-2 Manuel d'installation et d'utilisation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Alto-Shaam Hot Carving Shelf 100-HSL/BCS-2. Alto-Shaam Hot Carving Shelf 100-HSL/BCS-2 20 pages. Hot carving shelf, electric
Également pour Alto-Shaam Hot Carving Shelf 100-HSL/BCS-2 : Fiche technique (2 pages), Manuel d'installation, d'utilisation et d'entretien (19 pages), Manuel d'installation, d'utilisation et d'entretien (16 pages)
Imprimer la page
E L E C T R I C A L C O N N E C T I O N
D
ENSURE POWER SOURCE
MATCHES VOLTAGE STAMPED
ON APPLIANCE NAMEPLATE.
D
ELECTRICAL CONNECTIONS MUST
BE MADE BY A QUALIFIED SERVICE
TECHNICIAN IN ACCORDANCE WITH
APPLICABLE ELECTRICAL CODES.
1.
2.
3.
I N S T A L L A T I O N
N G E R
N G E R
/
VOLTAGE
PHASE CYCLE
HZ
D
IMPROPER INSTALLATION,
ALTERATION, ADJUSTMENT,
SERVICE, OR MAINTENANCE COULD
RESULT IN SEVERE INJURY, DEATH
OR CAUSE PROPERTY DAMAGE.
READ THE INSTALLATION,
OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR SERVICING
THIS EQUIPMENT.
Op eratio n & Care Manual •
230V:
NOTE:
ELECTRICAL
kW
AMPS
N G E R
5.
D
N G E R
To avoid electrical shock, this
appliance MUST be adequately
grounded in accordance with local
electrical codes or, in the absence of
local codes, with the current edition
of the National Electrical Code
ANSI/NFPA No. 70. In Canada, all
electrical connections are to be
made in according with CSA C22.1,
Canadian Electrical Code Part 1 or
local codes.