ESI 2TD-C48-30-SLV Manuel d'instructions de montage - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} ESI 2TD-C48-30-SLV. ESI 2TD-C48-30-SLV 12 pages.

Trada 2-leg

Step #1: attach legs to crossbars

• Position the two legs and crossbars as shown.

— Position the exposed inner channel of the crossbars against the front of the right motor housing and against the rear of the left

motor housing.

• Using the 4mm Allen key, attach the crossbars to the motor housing with the M8x16 flat head socket screws (8 screws total).

— Tighten all screws securely.

CAUTION: Do not insert any object through the middle holes on the housing. Doing so can damage electronic components.

5mm Allen key

M8x16

flat head socket screw

Step #2: attach feet to legs

• Using the 4mm Allen key, attach the feet to the legs with the M8x16 round head socket

screws.

— Be sure the short end of each foot is toward the rear.

CAUTION: Do not interchange the flat head socket screws in step #1 with the round

head socket screws in step #2.

crossbars

rear

short end

toward rear

5mm Allen key

M8x16

round head socket screw

Page 3

no objects through

middle holes

Assembly