ESI 3V-LX-C4836-30 Series Manuel d'instruction - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} ESI 3V-LX-C4836-30 Series. ESI 3V-LX-C4836-30 Series 12 pages. Victory-lx 3 leg electric table base
Imprimer la pageVICTORY-LX 3 LEG ELECTRIC TABLE BASE
PLEASE REVIEW these instructions before beginning the assembly procedures. Check that all the parts shown
below were provided with your order. Contact your supplier if any materials are missing. Do not discard the
PARTS PROVIDED
Side Legs with
Center Leg with
Motor (2)
Motor (1)
Feet (2)
Motor Cable (3)
Power Cable (1)
Fasteners
M6x18 (14)
Guides (8)
Socket Cap
CAUTION: Hand-tighten screws only.
ADDITIONAL TOOLS REQUIRED
•
Phillips screwdriver
• Power Drill (wood screws only)
NOTE: The Victory 3 Leg Electric Table Base can be used with 90° or 120° work surfaces. Assembly is the
same except for the attachment to the center leg brackets. On the following pages, the illustrations show
90° tables; 120° tables are illustrated only to show the difference in attachment to the center leg brackets.
1
Cross Channels (4)
Top Supports (3)
Glide
Control Unit (1)
U-Bracket (8)
M6x15 (12)
M6x20 (28)
Socket Cap
Round Head
your satisfaction.
Long
Left
Long
Center
Right
Left
Cord Clip (12)
M3x20 (3)
M5x15 (2)
Round Head
Round Head
CAUTION: Always check that screws
used to attach components to the
work surface are not too long for the
thickness of the surface.
PARTS AND TOOLS
Short
Right
Short
Center Leg Brackets (2)
Right
Left
Digital Keypad (1)
5mm Allen Key (1)
Hole Cover (26)
M3.5x16 (12)
Flat Head
Work
Surface