ClearMirror 16101-1212120H Manuel d'instructions d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} ClearMirror 16101-1212120H. ClearMirror 16101-1212120H 6 pages. Fog-free heaters for vanity mirrors

Imprimer la page

NOTE: Polarity is not relevant - there are neither positive nor negative connections on the

ClearMirror heater pad, nor are there any ground wires

CAUTION: Ensure leads are not stuck between the mirror and the wall.

CONNECT LEADS TO POWER SUPPLY

1. With assistance of another person, position the mirror to connect the heater leads to the

wire cable in the junction box.

2. Connect the mirror heater and power wires.

3. Wrap wire connectors and wire with electrical tape and push excess into junction box.

4. Replace light fixture onto base.

5. Turn on circuit breaker and switch for

overhead light.

6. Test ClearMirror by placing hand on surface of

mirror. It should heat in two minutes.

ClearMirror

Pad