3form SimpleSpec 200.08 Manuel d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} 3form SimpleSpec 200.08. 3form SimpleSpec 200.08 15 pages.
Imprimer la page
ready To Go
SimpleSpec 200.08
Installation
1
Install Ceiling Anchor for the First Cable Assembly cont...
d
Place a washer under the screw head.
g
Hollow Substrate Installation
Metal
Studs
Drill Ø3/4" (19mm) hole. minimum
clearance behind wall = 17/8" (48mm)
For more information, please visit 3-form.com or call 800.726.0126
November 2019 | mAN-rTG-200-08 | rev 003 © 2019 3form, Inc. All rights reserved.
tm
e
Torque the screw to 15 Nm.
h
Position the metal channel parallel
with the plastic legs. Insert the metal
channel through the drilled hole into
the wall cavity.
Installation Manual
f
remove screw.
i
Metal
Studs
Pull the metal channel firmly against the
inner wall cavity by tugging the plastic
pull ring.
6