3form SimpleSpec 200.25 Manuel d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} 3form SimpleSpec 200.25. 3form SimpleSpec 200.25 12 pages.
Également pour 3form SimpleSpec 200.25 : Manuel d'installation (12 pages)
Imprimer la page
Ready To Go
SimpleSpec 200.25
Installation
Required Tools
Drill
1
Install Base Profiles into Floor and Ceiling
a
For a single panel cut profiles (3-15-1886 and 3-15-1888) to approximately ¼ " more than the panel width ( ⅛ " on each end).
For multiple panels account for an additional ¼ " between panels, when using the two part clear seam "H" channel option.
*3-15-1887 comes cut to size.
b
*For wall-to-wall installation
insert blocks will need to be
inserted prior to anchoring
tracks (see Steps 2-3).
For more information, please visit 3-form.com or call 800.726.0126
OCTOBER 2020 | MAN-RTG-200-25 | REV 003 © 2021 3form, Inc. All rights reserved.
TM
#3 Square
Chop Saw
Level
11⁄64" Bit
Head Bit
16"
16"
(407mm)
(407mm)
16"
(407mm)
16"
(407mm)
Installation Manual
Flat Head Screwdriver
Metric Allen
Rubber Mallet
Wrenches
4