ClearOne MAX EX Manuel de démarrage
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} ClearOne MAX EX. ClearOne MAX EX 2 pages. Audio conferencing
Également pour ClearOne MAX EX : Fiche technique (3 pages), Manuel d'installation et d'utilisation (10 pages), Fiche technique (2 pages), Brochure (2 pages), Manuel d'installation et d'utilisation (11 pages)
Imprimer la page
P RO G R A M M I N G O P T I O N S
To Access the Programming Menus
Press and hold
until
appears on the LCD screen.Then press the key that
corresponds with the desired menu option and follow the instructions below.
Menu Option
Key
Programming
Ringer Melody
1
Press
1-5 to select a new melody. Press
Dialing Mode
2
Press
1 for tone, 2 for pulse. Press
Flash Duration
3
Press
duration. 1 = 600ms, 2 = 300ms, 3 = 150ms, 4 = 100ms, 5 = 80ms.
Press
Local Number*
4
Press
appear on the LCD screen when the phone is in standby.
Press
Press
Conference*
5
Conference key to dial. Press
Service*
Press
6
0
key to dial. Press
Press
Country
7
desired country. 1 = US/Canada/China/Japan/Mexico/Singapore,
2 = Europe CTR 21, 3 = Australia, 4 = S. Africa, 5 = Brazil, 6 = New Zealand,
7 = South Korea. Press
*Press & hold the "1" key to enter a hyphen or the "*" key to enter a space in the number. If a number has already been
programmed, use CLEAR to delete the old number before entering the new number.
T E C H N I C A L S U P P O R T
tel
1-800-283-5936
1-801-974-3760
CAUTION: Read the Safety Information in the user manual.
!
© 2004 ClearOne Communications, Inc. All rights reserved. Information in this document subject to change without notice.
800-158-016 Rev. 2.0. U.S. Patent No. D499,392.
ClearOne Communications ~ 1825 Research Way, Salt Lake City, UT 84119 ~ 1-800-945-7730 ~
. The current melody selection flashes. Press
to save selection.
. The current dialing selection flashes. Press
to save selection.
. The current duration flashes. Press 1-5 to select
to save selection.
. Enter the phone number that you want to
to save selection.
. Enter the phone number that you want the
to save the number.
. Enter the phone number that you want the
to save the number.
. Press the number key that corresponds with the
to save the country setting.
Press CLEAR to exit Programming mode.
fax
1-801-977-0087
e-mail
www.clearone.com
Max
™
EX
A u d i o C o n f e r e n c i n g
C O N F E R E N C E P H O N E S E T U P
To Connect Max EX
1. Connect the Cat. 5 cable from the Link Out jack on the base unit to the Link In
jack on the conferencing pod.
To Link In
25' Cat. 5 cable
To Link Out
2. Connect the base unit to the telephone jack using the RJ-11 telephone cable.
3. Connect the power cord to the base unit and plug it into an electrical outlet.*
* The power cord is not included with base units that plug directly into an electrical outlet.
To Connect Additional Units
From Link Out
To Link In
25' Cat. 5 cable
To Link Out on Base Unit
1. Connect the 12' Cat. 5 cable to the Link Out jack on the first phone and the
Link In jack on the second phone.
2. Continue linking up to three additional Max EX phones in the same fashion. A
total of four units may be connected.
Getting Started Guide
Rear of conferencing pod
RJ-11
Rear of base unit
telephone
cable
12' Cat. 5 cable
To Link In