3form SimpleSpec 200.56-ILTUO Manuel d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} 3form SimpleSpec 200.56-ILTUO. 3form SimpleSpec 200.56-ILTUO 7 pages.
Imprimer la page
Ready To Go
SimpleSpec 200.56-ILTUO
Installation
1
Drill Pilot Holes (�12)
a
base plate templates (3-15-2160) will be provided. The
base plate template has hole locations for drilling. Spac-
ers will also be provided, unique to this configuration; cut
to size based off post dimensions in the quoting phase.
b
Following the ILTUO Installation Template, drill pilot
holes. Use appropriate pilot hole diameter and depth for
the type of substrate you are fastening to.
*3form stocks the drill bits required for the concrete
and wood pilot holes. If you wish to purchase a drill bit,
please contact your 3form sales representative.
2
Assemble Vertical Posts (�3)
( 2) Screws
-
-
Base Plate
-
-
For more information, please visit 3-form.com or call 800.726.0126
December 2018 | mAN-rTG-200-56 | reV 002 © 2018 3form, Inc. All rights reserved.
ILTUO Installation
Template - Template Spacer
3-15-2347
tm
Installation Manual
ILTUO Installation
Template - Base Plate
3-15-2160
Substrate
Ø
Drill Bit
concrete
8mm
3-15-2350
Wood
3/16"
3-15-2335
Depth
Anchors
min 4.3"
3-15-2309
min 3.5"
3-15-2310
5