ClearOne WS880 Manuel de démarrage rapide - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} ClearOne WS880. ClearOne WS880 15 pages.

Receiver Back:

BACK PANEL WS880

BACK PANEL WS840

Euroblock to XLR Adapter:

For the XLR output option, the analog audio outputs will use a Euroblock-to-XLR adapter.

Antenna A Input: TNC connector for dipole antennas (included), front-to-back antenna cables (included), or

antenna cable to active extension antenna.

Antenna A Output: Daisy-chain to the input of another receiver-frame to form an antenna network.

Power Cord Input: (Cord with local plug configuration Included). 100-240 VAC, 50/60Hz, 15 W, 250V 320mA slow-

blow fuse (spare included).

Ethernet: Connect to a computer or network. Multiple receiver-frames can be daisy-chained together to form a

network.

Dante Secondary: Dante Secondary Connection (see pg. 10) (optional feature).

Dante Primary: Dante Primary Connection (see pg. 10) (optional feature).

GPIO/RS232: This connector combines a General Purpose Input / Output (GPIO) and a RS232 on one DB25

connector. The RS232 can be disabled to add up to 24 GPIO pins.

RS232: The pinout for the RS232 is the standard pinout. Pin 2 on the receiver is transmit, pin 3 is receive, and pin

7 is ground. Most computers now use a DB9 connector for RS232. The standard off-the-shelf DB9 to DB25 cable

will work. This cable swaps pins 2 and 3 internally. If you computer has a DB25 connector for RS232, use a straight

DB25 to DB25 cable. Do not use a null modem cable.

GPIO: GPIO acts like a contact closure. Use ClearOne Remote to assign an event that toggles the GPIO pin.

The factory default toggles pins X through X to correspond to muting a receiver module. ClearOne Remote has a

feature that lets you assign how the system responds to a transmitter mute (see ClearOne Remote).

A. Mute the channel's receiver audio (Factory default).

B. Toggle the GPIO but do not mute the receiver audio. Use this with automated mixers or echo cancelling DSPs.

C. Mute the channels receiver audio and toggle the GIPO pin.

DC Input: Optional external DC power source eliminates the need for AC input or, can be used as a redundant,

back-up power source.

Audio Output Jacks: Configured for four or eight-module receiver frames. Phoenix Euroblock connectors are

standard (Euroblock-to-XLR adapters are optional).

10. Antenna B Input: TNC connector for dipole antennas (included), front-to-back antenna cables (included), or

antenna cable to active extension antenna.

11. Antenna B Output: Daisy-chain to the input of another receiver-frame to form an antenna network.

(Euroblock / Phoenix Connector)