AIMON HMA-1 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AIMON HMA-1. AIMON HMA-1 8 pages. Headphone mixer/amplifier

Imprimer la page

Setup XBOX360 for AIMON HP:

On the XBOX360 main menu:

Go to Console Settings-> Audio -> Digital Output:

Select the "Digital Stereo" digital output data format.

Setup PC or other audio source to for AIMON HP:

1. For AIMON HP working as USB sound card on PC, select the "USB audio device" as your audio output and micro

phone input in your device manager window.

2. For other audio sources, setup your audio device digital output format to 44.1KHz or 48KHz PCM stereo.

Operation:

Operate your AIMON HP:

1. Power On/Off:

The AIMON HP will automatically turn on when powered up. To turn the Aimon HP off, press and hold the knob for

3 seconds. To turn the AIMON HP On again when it is off, press the knob.

2. Headphone master volume:

Turn the knob to adjust headphone volume. The luminance of the LED light ring indicates the volume level.

3. Setup and adjust audio level :

The settings of Digital Audio input level, Line In/AUX In audio level, amplifier gain and tone can be adjusted.

All the settings will be stored into the memory, it will recalled when it is powered up again.

The amplifier gain is for adjusting the output power for different headphone speaker size in order to get the best

dynamic range. In most cases the default factory setting is optimal. It is adjusted ONLY when you hook up a very

large low sensitivity headphone or very small phone.

a. Press the knob to enter Select mode and then turn the knob to select setting to be adjusted, the LED indicates

which setting is selected.