ClearRF WRE2710-S Manuel de l'opérateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} ClearRF WRE2710-S. ClearRF WRE2710-S 12 pages. Wireless network range extender
Également pour ClearRF WRE2710-S : Manuel d'utilisation et d'installation (12 pages)
Imprimer la pageWRE2710 Specifications
Frequency Range: Cellular 850 (824MHz – 894MHz), PCS 1900 (1850MHz – 1990MHz)
20dB BW: 850 UL: 39MHz, 1900 UL: 115MHz
Rated Uplink Maximum Output Power: Cellular 850; 27dBm, PCS 1900; 27dBm
Rated Downlink Maximum Output Power: Cellular 850; -20dBm, PCS 1900; -20dBm
Current Draw @ 12VDC: Idle: 250 milliamperes; Max: 1 amperes
Power Requirement: 8.0 to 36.0 volts DC (negative ground), Connector is center positive
Nominal Gain: Cellular 850: 15dB, PCS 1900: 15dB
Input/output Impedance: 50 Ohms
Rated Mean Output Power: 27dBm
FCC ID: XS7-WRE2710
IC ID: 8918A-WRE2710
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 ) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The term "IC:" before the radio certification number only signifies that Industry of Canada technical
specifications were met. The Manufacturer's rated output power of this equipment is for single carrier
operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5
dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This
power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of
the device.
La puissance de sortie nominale indiquée par le fabricant pour cet appareil concerne son fonctionnement avec
porteuse unique. Pour des appareils avec porteuses multiples, on doit réduire la valeur nominale de 3,5 dB,
surtout si le signal de sortie est retransmis et qu'il peut causer du brouillage aux utilisateurs de bandes
adjacentes. Une telle réduction doit porter sur la puissance d'entrée ou sur le gain, et ne doit pas se faire au
moyen d'un atténuateur raccordé à la sortie du dispositif.
FCC Regulatory Guidance: ClearRF's WRE2710-S operates under the rules and regulations as provided by the
Federal Communications Commission (FCC). For more information on these rules and regulations, please
contact the FCC directly at (888)-225-5322.
MAN-5446-001 Rev 7
10