Akiyama TA-9600D USB Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Akiyama TA-9600D USB. Akiyama TA-9600D USB 10 pages.

Imprimer la page

REAR PANEL

GND TERMINAL.

When there is hum, a low-pitched noise from speakers. It

can some times be eliminated by interconnecting this

GND terminal with that on the turntable in your system.

Hum can not always be eliminated by this method since

there are many other causes of it.

2. AUX INPUT JACKS.

These are for the connection of any auxiliary sources

such as CD players, Tuners on an additional. TAPE deck

for play back.

3. CD INPUT JACK.

These are for the connection of CD player.

4. TURNER INPUT JACKS.

These are used for the connection of any auxiliary source

such as TUNER.

5. PHONO INPUT JACKS.

Selects the input signal from a turntable connected to the

phono jacks on the rear panel.

6. TAPE PLAY AND REC JACKS.

These are used for the connection of any auxiliary source

such us TAPE player.

7. PRE OUT AND MAIN JACKS.

Usually keep the jumper plugs connected between the

PART NAMES AND FUNCTIONS

TA-9600D USB

PRE OUT and MAIN IN JACKS. These jacks are used to

connect a signal processing unit (such as a Graphic

Equalizer). Connect the inputs of the processor to the

PRE OUT jacks and its outputs to the MAIN IN jacks. If

you have a power amplifier with a higher out power, you

can connect PRE OUT jacks to the input jacks of the

power amplifier.

SPEAKERS OUTPUT TERMINALS

CONNECTING THE SPEAKER SYSTEM.

Output terminals for two pairs of speaker systems are

provided on the rear panel of the amplifier.

AC VOLTAGE SELECTOR (EX ONLY).

This unit operates on 220 volts AC. (240V).

AC OUTLET.

****UNSWITCHED AC RECEPTACLES****

Used to power associated equipment. AC voltage is

always present as long as the amplifier is connected to an

AC voltage source.

OUTPUT JACKS.

If you have a power amplifier with a higher output

power, you can connect the OUTPUT jacks of the power

amplifier.