Aimpoint Acro C-2 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aimpoint Acro C-2. Aimpoint Acro C-2 12 pages.

c Insert battery (2) with the positive end (+) toward the

battery cap (3) as seen in Fig. 1.

CAUTION: Check that the o-ring on the battery cap (3)

is in position and in good condition to ensure there is no

water leakage into the battery compartment.

d Tighten the battery cap (3) with the Aimpoint tool (8B).

When resistance is encountered, proceed to tighten

until the battery cap (3) is fully tightened.

NOTE: For long term storage of the sight, remove the

battery.

2.2 Turn ON / OFF and adjust red dot intensity

• Press

NOTE: The sight will always turn ON at setting 7 of 10.

• Hold

• Press

NOTE: Intensity setting 1 - 2 are intended for use with

NVD and intensity setting 3 - 10 for use in daylight.

to turn the sight ON.

to turn the sight OFF.

to adjust red dot intensity.