Altra 3022-L-12 Manuel d'utilisation pour les propriétaires - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour les propriétaires pour {nom_de_la_catégorie} Altra 3022-L-12. Altra 3022-L-12 12 pages.

Imprimer la page

Temperature unit convert function: When the heater is on, press and hold the Power Button

for 5 seconds, current temperature unit display will ﬂash 3 timers and convert to another

temperature unit (Note: This can't be set with the remote control).

Lock & unlock heater function: press and hold the Heater Button for 10 seconds, the ember

bed will ﬂash 6 times, indicating that the heater function is locked. To unlock the heater func-

tion, just repress and hold the heater icon for 10 seconds again, then the ember bed will also

ﬂash 6 times indicating the heater function is unlocked and to recover the original states which

you have set.(Note: This can't be set with the remote control).

The Timer Button

The TIMER has adjustable setting at range from 1 hour to 9 hours and OFF. As shown the

following: 1h-2h-3h-4h-5h-6h-7h-8h-9h-OFF. If the digital display turns on and nothing happens

within 10 seconds, the digital display will auto shut oﬀ. Once you have set the timer, and the

timer is up, close all the functions and enter standby mode. In this mode, you should touch the

power icon to restart the appliance.

The Increase/Decrease Button (Remote Control Only Function)

With the heater on, press the Increase/Decrease button to change the desired temperature.

There are 11 temperature settings: 82℉-ON - 64℉- 66℉ - 68℉-70℉-72℉-74℉-76℉-78℉-

80℉ (27℃-ON - 18℃-19℃- 20℃-21 ℃-22℃-23℃- 24℃-25℃-26℃).

INFRARED SENSOR

There's a set of infrared sensors on both sides of the ﬁreplace outlet in the front.

The ﬁreplace shuts down automatically when the sensor on either side(or both sides) is(are)

blocked by the door of the furniture. Blocking the sensors on the front disables the control

panel, there is no response by pressing any icon under this condition.

Push the door of the furniture aside and press power icon to turn on the ﬁreplace again.

Infrared sensors