Bambi PT Series Manuel de l'opérateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Bambi PT Series. Bambi PT Series 8 pages.
Également pour Bambi PT Series : Manuel de l'opérateur (12 pages), Manuel de l'opérateur (12 pages)

Imprimer la page
Bambi PT Series Manuel de l'opérateur
Wheel Kit [PT90]
Your compressor comes complete with a
wheel kit. Firstly, fit both casters using
the supplied fixings with a 14mm
spanner. Lock both caster wheels in
place with the foot pedal before lifting
the compressor to fit the wheels. Place a
Wheel Kit [PT90]
washer on the axle then fit the wheel,
holding it in place with the split pin.
Operation
Starting & Stopping
Plug the compressor into an outlet socket of nominal voltage.
All models:
As air is used the pressure drops and the motor will restart at the pre-set pressure.
There is approximately a 2 Bar differential.
PT90 – Turn the compressor on and off by turning the switch (I/O) on the top of the
pressure switch.
PTS20 - Press the green on off (I/O) switch on the front panel of the machine.
The PTS20 is fitted with a 4 amp overload protection. The reset button for the
overload protection is located above the on off switch on the front of the compressor
Note!
Each time the compressor switches off, you will hear a short hiss of air. You are
hearing the unloader valve discharging the residual delivery pipe pressure. This is
normal.
NEVER unplug the compressor when running. Always switch off using the red control
on the pressure switch to ensure the compressor discharges.
Failure to do so will cause damage and will invalidate your warranty.
3