Altra Industrial Motion Warner Electric PB-120 Manuel d'instructions d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Altra Industrial Motion Warner Electric PB-120. Altra Industrial Motion Warner Electric PB-120 18 pages. Primary brakes

Imprimer la page

Send Quote Requests to [email protected]

3 . Once the mounting surface has been

prepared, the magnet is bolted in place with

capscrews and lock wash ers . (Figure 2 .)

4 . After assembly, the magnet must be

concentric and square within the required

tolerances listed on the illustration drawing .

C. Assembling the Armature and Hub

1 . The antibacklash armatures are shipped

assembled and ready to be installed . See Step D .

2 . The standard armature and hub must be

assembled before it can be installed . Assemble the

armatures so that the shiny surfaces (120 and 170)

or backing plate sides (250 and 400) are against the

hub retainer ring (Figure 3) .

Warner Electric • 800-825-9050

Figure 2

Send Quote Requests to [email protected]

Call +1(800)985-6929 To Order or Order Online At Warnerelectricparts.com

Figure 3

3 . An optional release spring may be used with the

stan dard armatures and hubs . The release spring

forces the armature back against the hub retainer

ring when the magnet coil is de-energized .

Follow these instructions to assemble the armature

and hub when the optional release springs are being

used .

P-201-WE • 819-0480 3