ClearSpan SunBurst Manuel d'instruction - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} ClearSpan SunBurst. ClearSpan SunBurst 13 pages. Dome tents
Imprimer la pageCLEARSPAN
DOME TENTS
™
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the shelter. Additional tools and supports may be
needed depending on the structure, location, and
application.
•
Tape measure or measuring device
•
Variable speed drill and impact driver (cordless with
extra batteries works best)
•
Wrench, ratchet and socket (recommended)
•
Hammers and gloves
•
Duct tape (supplied by customer)
•
Box cutter or utility knife
•
Ladders, work platforms, and other machinery for lifting
designed to work safely at the height of the shelter
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin to assemble the shelter.
1. Unpack the contents of the shipment and place where
you can easily inventory the parts. Refer to the Bill of
Materials/Spec Sheets.
2. Verify that all parts listed on the Bill of Materials/Spec
Sheets are present. If anything is missing or you have
questions, consult the Quick Start Guide and all
shelter diagrams for clarification, or contact Customer
Service.
NOTE: At this time, you do not need to open the plastic
bags containing smaller parts such as fasteners or
washers.
QUICK START GUIDE
For an overview of this shelter and to view diagrams and
details, consult the Quick Start Guide located at the back of
this instruction packet.
Refer to the guide throughout the assembly of this shelter.
Visit www.ClearSpan.com for additional products and customer assistance.
4
Space below is reserved for customer notes.