ClearSpan 104903 Manuel d'instructions de montage - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} ClearSpan 104903. ClearSpan 104903 19 pages. Premium solar star greenhouse
Imprimer la page34. Secure the panel to the upper roof support plate and
to the 3" x 3" square flat brackets as previously
described.
35. Install the square flat brackets at the peak on the
inside (or underside) to attach the panels at the top.
36. Attach four 3" x 3" square flat brackets to the
underside surface of the roof panels in the locations
shown below.
NOTE: The next roof panels sit on the flat brackets.
37. Take a second long roof panel, set it in position, and
attach as previously instructed.
Visit www.ClearSpan.com for additional products and customer assistance.
ATTENTION: Unlock
the deadbolt of the door
at this time if you have
not done so.
38. Select a short, vented roof panel and attach it to the
greenhouse.
Drip Edge
39. Secure the panels at the peak on the inside using
Tek screws and the 3" x 3" square flat brackets.
40. Take two (2) sections of the CG96174 metal ridge
cap and attach these at the peak of the installed roof
panels.
ATTENTION: Each ridge cap section is longer than the
width of each roof panel and will extend beyond the roof
panel seams to overlap with the next section of ridge
cap.
The polycarbonate drip
edge of the short roof
panels is installed as
shown to the left.
Ridge Cap
CG96174
11 of 18