ClearSpan 108986 Manuel - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ClearSpan 108986. ClearSpan 108986 17 pages. End frame kit 36' wide x 16' 2" high
Imprimer la pageUNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin to assemble the end wall.
1. Unpack the contents of the shipment and place where
you can easily inventory the parts. Refer to the Bill of
Materials/Spec Sheets.
2. Verify that all parts listed on the Bill of Materials/Spec
Sheets are present. If anything is missing or you have
questions, consult the parts guide on the next page
and all diagrams for clarification, or contact customer
service.
NOTE: At this time, you do not need to open the plastic
bags containing smaller parts such as fasteners and
clamps.
QUICK START GUIDE
For a quick overview of the end wall and its components,
consult the Quick Start Guide at the back of these
instructions.
Optional End Panel Installation (additional purchase)
In addition to the end frame installation steps, these
instructions describe installing an optional end panel.
(Additional purchase required.)
The components used to install the optional end panel are
also described and shown during the procedure. Some
components may differ from what is shown.
Contact your sale representative to purchase an end panel
with end panel installation kit if desired.
ATTENTION: Some of these instructions may not apply
to your end wall and shelter. It is the customer's or
contractor's responsibility to adapt these instructions as
needed during the construction process.
These end wall kits are designed to attach to buildings
with a specific rafter pipe dimension. Differences in
pipe dimensions may require the purchase of additional
components. If you are securing the end frame kit to an
existing structure, verify that you have the required clamps
to complete the installation. May not apply to your building.
Revision date: 11.12.14
CLEARSPAN
The following graphics and photos will help you identify the
different parts. (Some parts are not shown.)
FA4482B
Tek Screw
QH1330
Angled Bracket
END WALL FRAMING KITS
™
100441
Nut Setter
104075
Square Tube
1.75" x 1.75"
3