Dixon Automatic Tool SKC-PTA-B120 Manuel d'utilisation et d'entretien - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Dixon Automatic Tool SKC-PTA-B120. Dixon Automatic Tool SKC-PTA-B120 12 pages. Automatic industrial cordless brushless power torque screwdrivers series

Imprimer la page

1. Full auto shut-off screwdriver:

It stops automatically when the screw has been tightened up and reached the set-up torque level. The

device will not cause damage of task since no continue running after screws are tightened.

(1) Trigger switch:

The LED lights on when the trigger switch has been pressed about one-third down, and then the

screwdriver starts functioning when the switch trigger has been pressed half way down; on the

contrary, it stops when the screw has been tightened up or the trigger has been released.

(2) Forward / Reverse switch:

When the switch turn to the right as arrow indicates, the screwdriver will be clock-wise screwing to

tighten things up; Vice versa, left switch means to release the screw. As the diagram showing, always

set the switch to neutral position when the screwdriver is not being used.

(3) LED light:

While press the trigger, the LED lights up automatically to assist the job to be done; on the contrary,

it will be off once the trigger has been released.

(4) Bit Sleeve:

Switch the screw bit and compatibility, pull the head of the type B screwdriver, and install the bit

according to the diagram below, after installing the bit please also install the W type cap and push it

in following the arrow indicated on the diagram below on diagram #2.

Pull the bit holder

Insert the bit into

Diagram 1

Manual / Function

Forward (screw)

Reverse (unscrew)

insert adaptor

follow by socket

Diagram 2