ClearSpan R024B00006 Manuel d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} ClearSpan R024B00006. ClearSpan R024B00006 7 pages. End panel
Imprimer la pageTable of Contents
Important Information ..............................................2
End Panel Design .....................................................4
End Panel Installation ..............................................5
Horizontal Conduit Installation ...............................6
Care and Maintenance Information .........................7
IMPORTANT NOTICE
Some buildings may include an aluminum end cap
(108867-diagram below), U-channel (102197-lower-right
diagram), or both, which are typically attached to the top
of each end rafter for the film cover installation. If your
building includes either or both of these items, you must
install the fabric end panel before you attach any of these
components to the end rafter.
108867
Dashed line shows
the outline of the
roll-form rafter.
108867 Aluminum End Cap
If you have already installed these and you have not
installed the end panel, remove the end cap and/or
U-channel, install the fabric panel as described in this
guide, and then reinstall the components.
2
Important Information
READ THIS DOCUMENT BEFORE YOU BEGIN!
Thank you for purchasing this ClearSpan™ end panel kit.
This guide includes helpful hints and important information
needed to safely attach and properly maintain the end
panel. Please read these instructions before you begin.
If you have any questions during the assembly, contact
customer service for assistance.
SAFETY PRECAUTIONS
•
Wear eye protection.
•
Wear head protection.
•
Wear gloves when handling metal tubes (if equipped).
•
Use a portable GFCI (Ground Fault Circuit Interrupter)
when working with power tools and cords.
•
Do not climb on the end wall or shelter frame during or
after construction.
•
Do not occupy the shelter during high winds,
tornadoes, or hurricanes.
•
Never attempt to install an end panel during windy or
stormy conditions.
•
Anchor the main shelter frame
panel.
•
Do not store hazardous materials in the shelter after
installing end panels.
•
Provide proper ingress and egress to prevent
entrapment.
WARNING: The individuals assembling this end
frame are responsible for designing and furnishing all
temporary bracing, shoring and support needed during
the assembly process. For safety reasons, those who
are not familiar with recognized construction methods
and techniques must seek the help of a qualified
contractor.
102197
before installing an end
Revision date: 06.21.12