ClearSpan Storage Master 104598 Manuel d'instruction - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} ClearSpan Storage Master 104598. ClearSpan Storage Master 104598 17 pages. Poly buildings
16
Step One: Cut off the excess strap leaving 12" in length.
Step Two: Feed the strap through the center slot in the ratchet and tighten
slightly.
Step Three: The hem containing the cover conduit needs to be slit or notched at
each leg where you will install a strap. If your cover was not notched at the
factory, continue with this step. Cut a 2" long slit in the hem just above the cover
conduit. Repeat this step on the other side of the hem so you can pass a 1" wide
strap over the conduit through the slits. Feed the both strap ends together
through the slot in the ratchet spool and tighten slightly. Refer to the photos
below.