DIY PICmicro K149 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DIY PICmicro K149. DIY PICmicro K149 16 pages. Usb programmer

Board Construction

The board is quite easy to construct and it is advisable to read through these

notes before starting. The USB chip is quite tiny and should be mounted on the

underside of the PCB ready for use.

WARNING

Be aware that the premounted USB chip is sensitive to static electricity discharge

and could be damaged by mishandling of the PCB. Be careful with the board and

avoid touching any of the tracks or pads while assembling it. Try to handle it only

by the edges.

Other chips in this kit are also sensitive to static discharge. These are the

PIC16F628 and ICL232 chips. Do not touch the pins and only handle them by

their ends. It is advisable to use sockets for these two chips.