3G Quest GPX-100 Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 3G Quest GPX-100. 3G Quest GPX-100 17 pages. Avl (automatic vehicle locator)

Imprimer la page

2. Operation

The keys on the device should match those on the remote controls. For the

simplicity, the key will be meant either remote control key or device panel key.

2.1. Making a call

To make a phone call to a preset recipient, please reference to

phone call recipients

2.2. Receiving a call

To pick up an incoming phone call, press Call key to start the call. To hang up a

phone call, press Clear/Hangup key to terminate the call.

2.3. Sending current location

There are two modes of sending vehicle location

Manual mode: As

pressing Trace, F1 then Trace, F2 then Trace, or F3 then Trace, the current

vehicle location will be sent to the specific recipient.

Auto mode: To enable the auto mode, by pressing the F2 key on the

device and wait for the F2 LED being on, the device will enter the auto

mode. The recipient is the last recipient of the manual mode; the interval

is defined in the

pressing the F2 key again and wait for the F2 LED being off, the device

will return to the Manual Mode.

2.4. Navigation

AVL GPX-100 User's Manual

Setup Text Message recipients

2.1.3.3

Auto Trace Rate (Figure 7)

3G Quest Technologies, Inc.

2.1.3.2 Setup

described, by

. To disable the Auto Mode, by