ClearView WiFi-2MP-BL100 Manuel Faq - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel Faq pour {nom_de_la_catégorie} ClearView WiFi-2MP-BL100. ClearView WiFi-2MP-BL100 12 pages. Wireless bullet camera

Imprimer la page

3.5 Device is leaking water.

Solution 1: Users dismantled the front cover and rear cover by themselves, which were not installed

properly.

Solution 2: The front cover glass is strongly pressed or crashed.

Solution3: The waterproof plug of rear cover is loose.

3.6 WIFI-2MP-BL100 failed to recognize SD card.

Solution 1: Check if the card slot is loose.

Solution 2: Check if the SD card in the computer is recognizable and there is no abnormality.

3.7 Config info is mismatched with real situation after WIFI-2MP-BL100

working for a while.

Solution 1: refresh the interface.

Solution 2: It is caused due to the modification of WIFI-2MP-BL100 config; it doesn't belong to the

WIFI-2MP-BL100 problem. Users can check what platform manages WIFI-2MP-BL100 or

which device that the rear end is connected to. They can use check the exact reason by

adopting separated checking method. Currently the PSS client and soft decoder can modify

the Baud rate of some WIFI-2MP-BL100, which leads to a situation where the WIFI-2MP-

BL100 is out of control.

3.8 Power adapter is unsteady.

Solution: The high and low temperature environment is from 0℃ to 40℃ for general power adapters,

the power supply will become unsteady if the adapter is beyond this range. Therefore, it is

necessary to change to industrial power adapter.

3.9 SD card failed to store video.

Solution 1: Check if the SD card status is set as read only status, if so; you need to change it to

read/write status.

Solution 2: Check if the SD card can be detected.

Solution 3: Check if the SD card has been damaged.