Edgewater Networks EdgeProtect 7300 Manuel d'installation du matériel - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Edgewater Networks EdgeProtect 7300. Edgewater Networks EdgeProtect 7300 18 pages. Enterprise session border controller 7000 series
Également pour Edgewater Networks EdgeProtect 7300 : Manuel du matériel (16 pages)

Imprimer la page

Caution

Secure the AC power cord to a cable management system using a fastener or

tie wrap to insure the EdgeProtect 7300 does not hang from the AC outlet.

2. If connecting to an Internet router, Internet DMZ switch, cable modem or DSL modem,

connect the Ethernet cable to the WAN Interface port (Port 2) on the EdgeProtect 7300

and the other end to the WAN device.

Connecting to the EdgeProtect 7300 for the First Time

The EdgeProtect 7300 is pre-configured with the IP address 192.168.1.1 on the LAN

interface port (Port 1).

1. Connect the 3-pin female power cord plug to the power socket on the EdgeProtect

7300. Connect the other end to an AC wall outlet.

2. Turn on the EdgeProtect 7300 power switch.

3. Make sure that the power and status LEDs on the front panel are solid green after the

EdgeProtect 7300 powers on.

4. Connect a computer to the LAN interface port (Port 1) using an Ethernet cable or

connect to an Ethernet switch (using the IP address 192.168.1.2 and subnet mask

255.255.255.0).

5. Launch a web browser on the computer and enter the URL string

6. Press Return. The EdgeProtect VoIP Operating System (VOS) log in screen opens:

7. Log in with the following credentials:

User name: admin

Password: default

8. The EdgeProtect VOS system window opens.

9. Configure Network parameters are other settings for your EdgeProtect 7300 using the

instructions in the EdgeProtect VOS User Guide available on the Edgewater Networks

web site: www.edgewaternetworks.com.

http://192.168.1.1