Edgewater Networks EdgeMarc 2900e Manuel d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Edgewater Networks EdgeMarc 2900e. Edgewater Networks EdgeMarc 2900e 4 pages.

Imprimer la page

Connecting the Power and Cables

1. Place EdgeMarc into install location either in a rack with PBX or on a shelf near PBX

2. Plug Power Cord into the port (circled in red) on back panel and plug other end of cord into an

electrical outlet being careful to avoid pressing the Erase Button

3. Plug ethernet cable into port (circled in blue) on rear panel and plug into LAN port on broadband

router or modem

4. Plug ethernet cable into port (circled in green) on rear panel and plug into LAN port on IP PBX or on

Prem SBC

5. Make sure that the power and status LEDs on the front panel are solid green after the EdgeMarc

powers on

6. Call 866.780.8639 to inform IntelePeer NOC device is plugged in and powered on

SIP to SIP Device Installation

Rear Panel