ClearView HD168Bi Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ClearView HD168Bi. ClearView HD168Bi 9 pages. Quad cvbs/hdmi hd encoder modulator
Également pour ClearView HD168Bi : Manuel de l'utilisateur (10 pages)
Imprimer la page
3.2 Starting
3.2.1 Beginning Setup
DEVICE Programming and Setup
1. Apply power.
2. Connect Audio / Video source
Connecting to the GUI Interface:
1. Connect an Ethernet cable directly to the Ethernet port on the rear panel of the encoder
and then connect the Ethernet cable to an Ethernet switch /router or connect an
Ethernet Cable to your PC.
2. Using a Windows-based PC Select Windows Icon
3. The default IP address is 192.168.1.138 Make sure your PC has the same 3 first section IP
range.
4. Key in the IP address in web browser 1 9 2 . 1 6 8 . 1 . 1 3 8
3.2.2 Step 1: Login and System Settings
Login Password:
Default Password: 1 2 3 4
Encoder Programming and Setup via GUI Interface and click on
Setup/System:
You can set the reset mode, HDPC Enable or Disable, IP Address then Save Settings to the
left of each group. After setting all these parameters, you need to press the-
Store Settings and Reboot System for them to be saved completely.
SETUP
then on
HD168Bi Manual Rev 1.0