DIYElectronics PRUSA I3 Manuel de construction - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel de construction pour {nom_de_la_catégorie} DIYElectronics PRUSA I3. DIYElectronics PRUSA I3 19 pages.

[8.2] Door Magnets

• Attach perspex magnet to the

inside of the perspex on the

top right corner using M3x20

screws, nuts and washers

* Please note top and bottom magnets are

labelled in seperate packets, do not get

these mixed up

• Attach enclosure magnet to

the inside of the enclosure on

the top right corner using an

M3x20 screw and nut

• Repeat these steps for the

bottom, make sure the inside

magnets line up with the

outside magnets

[8.2] Door Knob

• Insert M4x16 screw into the

door knob

• Fasten onto perspex using

an M4x16 screw, nut and

washer

* Do not overtighten to avoid cracking the

perspex